CRYSTOR is a crystalline waterproofing formulation of selected blends of cement, very fine treated silica sand and various proprietary active chemicals providing a lasting imperviousness to water.
CRYSTOR is a unique chemical treatment for the waterproofing and protection of concrete. In the presence of moisture, the active chemicals in CRYSTOR penetrate concrete and react chemically with free lime to produce insoluble blocking capillaries and filling hairline non-structural cracks caused by shrinkage or expansion
* ready to use, easy to apply
* very economical
* for internal and external application
* can be applied on green concrete
* can be painted over
* for use in contact with potable water
* effective treatment for hydrostatic conditions
AREA OF APPLICATION
CRYSTOR can be applied on both new and old structures either on the water retaining side or on
he negative side. CRYSTOR is recommended for the following typical applications:
* water treatment and sewage structures
* basement walls
* irrigation tunnels
* supporting walls and columns
* tunnels, manholes, silos
* foundation slabs inside underground garages
Concrete surface to be treated must be clean and free of laitance, dirt, paint coating and other foreign matter.
Release the powder as close to the wet concrete as possible to prevent material from blowing away.
Two applications are recommended with roughened finish on the first application providing adequate adhesion on the second application. Float slab and trowel to final finish
Comments for CEMENTITIOUS CRYSTALLIZATION WATERPROOFER